The Tailor’s Board for the WHP of sleeve caps is a must-have tool for sewers. The processing of sleeves, coupled with their joining with arm holes, belongs to the most complicated sewing operations. Therefore, if you want to set a sleeve in a good position at the end of the day, you should not only design the sleeve properly but also join the control marks with each other (the cap with the arm hole) while laying straight stitches and, most importantly, performing a proper and good-quality wet-heat processing by means of special Tailor’s Boards. Only then you will get the correct shape and a good fitting of the sleeve.
The Tailor’s Sleeve Cap is an excellent and indispensable assistant for those who often sews jackets, suits, coats, and other garments where set-in sleeves are needed.
The functionality of the Board:
The Tailor’s Board Sleeve Cap is made out of hard-wooded broadleaved species — beech/ash/alder tree. The material of the working form — a single piece of wood.
Upholstery: foam + double-layer outer cover from 100% cotton.
Size: overall height 20 cm, length of the working platform 10 cm, height of the working platform — 8 cm, breadth of the cap — 11 cm, cap — 24 cm.
This Tailor’s Board is multipurpose — it is suited for the WHP of both the men’s and women’s clothing.
|Dimensions||10 × 11 × 20 cm|
Beige knitted fabric, Grey knitted fabric, Light blue knitted fabric, Pink powdery knitted fabric, White knitted fabric