The Board Collar Combined is designated for the WHP of collars, cuffs, and various angles.

The Board has two edges sharpened in a different way. On the one edge, there is a pointed end — it helps in pressing collars in an ideal manner as well as in producing beautiful angles; it also allows to press hard-to-reach areas and small parts of garment cutouts.

On the second edge, there is a rounded end for pressing round collars and all rounded garment parts. 

The platform (rest) of the Collar Board can be used as Point Presser and Pounder for cooling seams and pressing them open. The wood nicely absorbs moisture and heat so that it reduces the thickness of seams while fixing the forms of garments.

The Collar Board is made out of a hard-wood broadleaved species (beech tree) and is characterized by high density. The surface of the Collar Board is smoothed in 7 stages and polished after that — this is a 100% guarantee against damaging garments while making it possible to use the Board in work with the most delicate fabrics.

The Board is manufactured with hidden fixings; it is practical in use and smells pleasant like natural wood.

Maintenance recommendations for the Collar Board: do not keep the Collar Board in wet, unheated rooms. Move it carefully and try not to let it fall down, or else splits and cracks may appear. If, with age, burrs have appeared, it should be very easy to remove them with fine sandpaper. If dents have appeared, you should take a piece of cloth, put it on the dented place, and iron it properly.

On our web store, you can order various Tailor’s Boards of all sizes and of all materials at your choice: beech, alder, oak tree. Depending on design, size, and materials used, the product prices may vary.

Size:

Collar part: Length 40 cm х Thickness 2 cm х Height 12 cm

Platform (rest): Length 28 cm х Breadth 10 cm х Thickness 2 cm