The Board Tailor’s Cap with two different radiuses is designated for assembling and shaping shoulder areas (arm holes and sleeve caps) as well as for the wet-heat processing of those areas. This Board is available in two standard sizes: caps for the WHP of the children’s clothing and flexible caps for ironing the women’s and men’s clothing.

The Tailor’s Cap has two sides which differ in their radiuses. It is suitable for the WHP of the men’s and women’s clothing of different size. One feature makes this Board flexible: if you need to perform the WHP of the women’s large-sized clothing, you can easily make use of the side with the longer radius (of the side for the WHP of the men’s clothing).

The Tailor’s Cap with Two Radiuses is a must-have tool for sewers. The processing of sleeves, coupled with their joining to arm holes, counts as one of the most difficult sewing operations. Therefore, if you want to set a sleeve in a good position at the end of the day, you should not only design the sleeve properly but also join the control marks with each other (the cap with the arm hole) while laying straight stitches and, most importantly, performing a proper and good-quality wet-heat processing by means of special Tailor’s Boards. 

The Tailor’s Sleeve Cap is an excellent assistant for those who often sews jackets, suits, coats, and other garments where set-in sleeves are needed. The Tailor’s Cap makes it possible to remove sewing defects as well as to achieve a proper, required shape of sleeves while putting them into the right position.

The Board’s functionality:

• shaping caps (without rising from the working place);
• shrinking caps (when needed);
• checking the fitting of sleeves bevor stitching in arm holes;
• pressing shoulder seams open or pressing them to one side;
• WHP of shoulder darts (out of shoulder cuts, out of neck hole cuts);
• WHP of loopback elements (neck holes, cuffs);
• restoring shoulder areas and sleeve caps in their initial forms after laundering.

The Tailor’s Board Sleeve Cap with two different radiuses is made out of hard-wooded broadleaved species — beech/ash/alder tree. Upholstery: foam + outer cover from 100% cotton. 

Size:

Multipurpose Cap for the WHP of the women’s and men’s clothing:

Overall height — 27 cm, length of the working platform — 20 cm, breadth on the one side in the bigger part — 14,5 cm, height 11,5 cm, breadth on the other side in the small part 11,5 cm, height 8,5 cm.

Children’s Cap:

Overall height — 22 cm, length of the working surface — 20 cm,

Breadth of the smaller side — 8 cm, height — 6,5 cm, breadth of the bigger side — 10 cm, height — 8 cm.